Temperature Corporation manufactures portable water cooled chillers (with a water cooled condenser) for any industrial process that requires process cooling. Our WCP Series water chillers were designed to cool down both the process as well as the process equipment.
Standard Series WCP–3SZV-SP to WCP-20SZV-SP single compressor chillers and WCP–10DZV-SP to WCP-40DZV-SP dual compressor with dual refrigeration circuit chillers.
The standard portable chiller is a mid-sized model that offers medium capacity cooling of 5 tons to a maximum of 40 tons at 50° F leaving water temperature at 85 F condenser water temperature. Temperature range is from 20° F (-6.6 C) to 70° F (21 C) leaving water or water/glycol temperature.
If you have an existing cooling tower a water cooled chiller is the better way to go as it is more efficient (tons/Kw) than an air cooled chiller and will consume less power.
- With 12 models to choose from.
- 2 year parts warranty.
- Our unique design has the components accessible for inspection, maintenance and service.
- Single Scroll compressors up to 20 hp.
- Dual compressors from 10 hp up 40 hp.
- Our chillers come standard with hot gas by-pass for capacity control.
- Water regulating valve for head pressure control.
- For freeze protection we include both a water flow switch and a freeze thermostat.
- Stainless steel bolted base frame with galvanized steel panels.
- Stainless steel tank and pump up to 5 hp, cast iron from 7.5 hp and up.
- Stainless steel brazed plate evaporator for cooling, not an inefficient coil-in-tank which is very difficult to repair and extremely expensive to replace.
- NEMA / EEMAC Type 4/12 Control Panel.
Main Features
COMPRESSOR
The standard portable chiller comes with a single scroll compressor up to 20 tons and dual compressors up to 40 tons and comes with a hot gas by-pass for two (2) steps of capacity control, 100%, 50% and off for the single compressor and four (4) steps of capacity control, 100%, 75%, 50%, 25% and off for the dual compressor.
Optional two stage compressors with hot gas for 3 steps of capacity control on the single compressor chiller and 6 steps with dual compressors. Digital compressors from 100% to 20% full load.
EVAPORATOR
The evaporators are single circuit up to 20 hp and dual circuits from 10 hp up to 40 hp with 316L stainless steel copper brazed plate chiller vessel with a water outlet freeze thermostat, water flow switch and return line bronze “Y” strainer.
CONDENSER
The condensers are single circuit up to 20 ton and a dual circuit from 10 hp up to 40 ton with 316L stainless steel copper brazed plate condenser with pressure relief valve and water regulating valve for head pressure control.
TANK
The all welded tank is fabricated from 14 gauge stainless steel complete with 3/4″ closed cell thermal insulation tank with a 1¼” clear plastic water fill – level – vent tube with vented cap, side bottom drain with shut-off valve and return line strainer with shutoff valve. Tank capacity ranges from
20 gallons to 100 gallons
PUMP
The standard model comes with a stainless steel pump up to a 5 hp and cast iron from 7.5 hp and up, all close coupled to a 3500 rpm TEFC motor. Pumps complete with non-ferrous piping with a bronze suction shutoff valve, suction and discharge fittings for pump removal, a bronze discharge check valve and flow control shutoff valve and a pump discharge pressure gauge with shutoff valve.
Optional available are discharge water pressure operated by-pass valve to maintain flow, 1750 rpm pumps for low pressure operation and higher pressure pumps.
CONTROLS
The controls consist of a two (2) stage thermostat for single compressors with refrigeration high and low pressure safeties, run and fail lights and compressor and fan motors internal thermal overload protection in winding.
The dual compressor chillers have a “chiller controller” with door mounted key pad display with high and low pressure sensors, chilled water in and out temperature sensors, freeze fail, flow fail and compressor internal protector.
FREEZE PROTECTION
The chiller uses both a flow switch and a freeze thermostat.
COMPONENTRY
Other notable components include a refrigeration expansion valve, sight glass moisture indicator, filter dryer, liquid line solenoid with shutoff valve, a hot gas solenoid with shutoff valve and a compressor crankcase heater.
ELECTRICAL CONTROL PANEL
NEMA 4/12 (EEMAC 4/12) control panel with through-the-door non-fused disconnect, compressor and pump three phase fuses, compressor motor contactor, pump motor starters, control voltage transformer with primary and secondary fuses, power on, run and fail lights, two stage thermostat or chiller controller, chiller are ESA or CSA approved at our plant and shipped with label.
FRAME SIZE
Chiller base frame is fabricated from 12 ga. stainless steel bolted frame with galvanized steel panels and 2” wide x 5″diameter casters: two swivel and two rigid.
VOLTAGE
All models 230/460/575V, 3 phase, 60 hertz and 380V, 3 phase, 50 hertz.