Packaged Chillers

If you’re looking for a cooling solution between a portable chiller and a central or plant wide chilling system, the chillers are fixed in position for a dedicated use only as they cannot be expanded. We offer a complete line “Packaged Chillers” with double pumps.


Temperature Corporation manufactures a complete line of “Packaged Chillers” in indoor air-cooled, outdoor air-cooled, water cooled and remote air-cooled condenser for a variety plastic and process plants.

With double pumps you have the best of both worlds where the smaller pump is dedicated to the evaporator for constant flow and pressure for maximum chiller efficiency and a larger process pump with a varying flow and higher discharge pressure is required.

WC–DP – Packaged Water Cooled Scroll

Standard Series WC–10SZV-DP to WC-20SZV-DP single compressor and WC–10DZV-DP to WC-40DZV-DP dual compressor dual with dual refrigeration circuit and double pump tank set.

The standard packaged chiller is a mid-sized model that offers medium capacity cooling of 10 tons to a maximum of 40 tons at 50° F (10 C) leaving water temperature at 85 F (29 C) condenser water temperature.

If you have an existing cooling tower a water cooled chiller is the better way to go as it is more efficient (tons/Kw) than an air cooled chiller and will consume less power.

  • With 12 models to choose from.
  • Temperature range is from 20° F (-6.6 C) to 70° F (21 C) leaving water or water/glycol.
  • Our unique design has the components accessible for inspection, maintenance and service.
  • Single Scroll compressors up to 20 hp.
  • Dual compressors from 10 hp up 40 hp.
  • Our chillers come standard with hot gas by-pass for capacity control.
  • Water regulating valve for head pressure control.
  • For freeze protection we include both a water flow switch and a freeze thermostat.
  • Stainless steel bolted base frame with galvanized steel panels.
  • Stainless steel brazed plate evaporator for cooling, not an inefficient coil-in-tank which is very difficult to repair and extremely expensive to replace.
  • Single evaporator pump with suction and discharge shut-off valves.
  • Single process pump with suction and discharge shut-off valves and discharge check valve.
  • Pump fuses and motor starters inside chiller control panel.
  • NEMA / EEMAC Type 4/12 Control Panel.

Main features same as the WCP Portable Chillers.

ACP – Standard Series Air Cooled

Standard Series AC–10SZV-DP to AC-20SZV-DP single compressor and AC–10DZV-DP
to AC-30DZV-DP dual compressor with dual refrigeration circuit and a double pump tank set.

The standard portable chiller is a mid-sized model that offers medium capacity cooling of 10 tons to a maximum of 30 tons at 50° F (10 C) leaving water temperature at 95 F ( 35 C) plant air temperature. Temperature range is from 20° F (-6.6 C) to 70° F (21 C) leaving water or water/glycol temperature.

  • With 11 models to choose from.
  • 2 YEAR parts warranty on the whole chiller.
  • Our unique design has the components accessible for inspection, maintenance and service.
  • Single Scroll compressors up to 20 hp.
  • Dual compressors from 10 hp up 30 hp.
  • Our chillers come standard with hot gas by-pass for capacity control.
  • For freeze protection we include both a water flow switch and a freeze thermostat.
  • Stainless steel frame, tank and pump up to 5 hp, cast iron from 7.5 hp and up.
  • Stainless steel brazed plate evaporator for cooling, not an inefficient coil-in-tank which is very difficult to repair and extremely expensive to replace
  • Single evaporator pump with suction and discharge shut-off valves.
  • Single process pump with suction and discharge shut-off valves and discharge check valve.
  • Pump fuses and motor starters inside chiller control panel.
  • NEMA / EEMAC Type 4/12 Control Panel.

Main features same as the ACP Portable Chillers.